Noise and Thermal Testing - Fractal Design Define Mini Case Review

Noise and Thermal Testing

In a bid to focus on providing only useful information and keeping things clean, simple, and to the point, I've culled idle thermal test results from this review (and will from reviews going forward). Idle thermals are borderline irrelevant, and only important when they're comically high; at idle, the most important statistic is noise.

As I mentioned on the Testing Methodology page, due to retiring the micro-ATX board from the primary testbed, micro-ATX cases will now be tested with the mini-ITX testbed. That means that I can't compare the Fractal Design Define Mini directly against the SilverStone SG09 and the Rosewill Line-M. As it turns out, that may not be as big of an issue as it first appears.

The Fractal Design Define Mini was tested with the included fan controller at its lowest and highest settings. Ambient temperature ranged between 22C and 25C during testing.

Already things aren't looking that great for the Define Mini. Changing the fan setting doesn't do a whole lot fo the CPU, but the system just isn't very good at keeping the CPU cool. In Fractal Design's defense, this case looks better suited to a tower-style cooler, but as you'll see later, the problem may not be simply a cooler not being right for the case.

While the highest fan setting is definitely louder than the lowest, it's not tremendously slow, and it's still below the 30dB floor of our sound meter. If nothing else, in our barebones stock configuration, the Define Mini is very quiet.

Ordinarily adding a dedicated graphics card will bump the CPU temperatures up a couple of degrees (sometimes it actually can reduce them a little since the IGP is no longer in use). Not so, here. The GTS 450, typically a model citizen, just makes a bad situation worse. And despite having direct airflow from the front intake, it still runs hotter than the bulk of the cases tested.

Noise levels continue to be low, but they can't really make up for the consistently poor performance of the stock fans in the Define Mini. Bumping the graphics card up to a bigger monster like the GTX 560 Ti does seem to help at least a little, though.

Comparative performance improves some and the two fan settings start to really separate. While not strictly comparable to results from the main testbed (which has an extra 30W of CPU heat to dissipate alongside the 560 Ti), the graphics card's performance is now at least competitive. CPU thermals continue to underwhelm, though, with the highest fan setting being required to produce decent results.

The Define Mini does a strong job of proving its worth once the noise results come in, though. Things are running pretty warm, but they're reasonably quiet, too. At idle the system remains inaudible, while load noise is fairly low. This is one of those instances where a higher case fan speed can actually produce lower noise, though, as the graphics card's fans don't need to spin as fast to move cool air over the GPU.

ncG1vNJzZmivp6x7orrAp5utnZOde6S7zGiqoaenZIN6fJhonauZk6murXnDnqqin55isaayyKecZqWZo7Zur8CsnGaqlau2psOObg%3D%3D